American type hose clamp

American type hose clamp 1.Stainless steel 2.bandwidth:8,12.7mm etc 3.thickness:0.7-1mm 4.perforated band

American type hose clamp

Product details:

1.material:stainless steel and galvanised steel2.band 8mm,10mm,12.7mm,14.2mm ,15.8mm

3. 0.6mm,0.7mm,0.8mm band thickness4.finish :polish or zinc-plated

Feature

1.A general purpose Industrial Clamps.

2.Developed for Maintenance free, Long Life applications.

3.Extra strong interlocking won't pull apart.

4.No spot welds to rust, corrode or rupture.

5.Smooth underside insures most effective seal possible.

6.Hollowed band keeps positive grip, sustains extreme torque and vibration.

7.Stainless Steel Clamps provide significant advantages in strength, unlimited 

 torque and corrosion resistance.

8.Stainless Steel Band with a tensile strength of105.5 kg/mm2(150000 psi) are 40% to 50%stronger than carbon steel bands.

9.Best results are obtained in petroleum industry, marine engineering, chemical

 industry etc. 

Material

W1: All parts steel are zinc plated steel.W2: Band & hosing are stainless steel, the screw is zinc plated steel.

W3: The screw is 410, others are 430ss/200ss or other kinds of stainless steelW4: All parts are 301/304 stainless steel.

W5: All 316 stainless steel

no.	type/inch	use range /mm	band width/mm	carton size/mm	carton qty/pcs	G.W./kgs
00#	3/8	6-10	8	40x26x12	2000	12
0#	1/2	6-13	8	40x26x14	2000	12.5
#4	5/8	6-16	8	40x26x14	2000	13
#6	3/4		8	40x26x16	2000	13.5
#8	7/8	13-23	8	40x26x18	2000	14
	1	16-25	8	40x26x18	2000	14.5
#12	1-1/4	18-32	12.7	50x32x21	1000	20
#16	1-1/2	21-38	12.7	50x32x24	1000	21
#4	2	27-51	12.7	50x30x21	500	11

  

Manufacture Process:

Screw:Shall be held captive in the clamp Housing.

Band: Band shall have a thread form commencing at the free end and extending for a length sufficient to enable the clamp to be tightened on to the smallest diameter of component within theworking range for which it is designated.

Housing:The housing shall not be readily removable from the band.

Finish:The various parts of the clamp are given a smooth polished finish and are free from rough and sharp throbbing edges. Clamp produced are protected with electroplating coating of zincas per Fezn 12 of IS: 1573/1970

The Clamp shall be tightened to 75% of the torque load as shown in table. On release, visual examination of the assembly shall reveal no sign of permanent distortion of the housing nor damage the efficient functioning of the clamp. The clamp shall than be retightened until permanent distortion or failure occurs.

Range of use: 

Used in automobiles, tractors, ships, gasoline, engine, each kind of mechanical device for oil, gas, hydraulic hose connector.

Samples can be offer by,

Customer

Market